8-Position NSH Receptacle Housing at 1.00mm Pitch
The JST NSHR-08V-S is the 8-circuit receptacle housing from the NSH series, a 1.00mm-pitch wire-to-board connector family built for compact, single-row harness applications.
A common BOM mistake is ordering the housing alone and stopping the line; the terminal part number must be on the same requisition.
This receptacle mates with the JST NSH series pin header — the 8-position through-hole or SMT header.
Position Count Options in the NSH Series
The NSH receptacle housing family runs from 2 to 13 positions at the same 1.00mm pitch and single-row layout. Compared to the 6-position NSHR-06V-S or the 7-position NSHR-07V-S, the 8-position NSHR-08V-S matches an 8-circuit BOM line directly — no blank positions or jumper work. The 9-position NSHR-09V-S is the next step up if you need an extra circuit, but the housing width increases by one pitch increment (1.00mm) so the board header footprint must shift accordingly.
Compliance and Sourcing
No end-of-life notice or successor part is listed.