Skip to main content
Log in
PAP-04V-S — JST product photo
JST

JST PAP-04V-S PA Receptacle Housing, 4 Pos, 2.00mm

MPNPAP-04V-S
Active

JST PA series receptacle housing, 4 positions, 2.00mm pitch, 1 row, natural PA66, latch lock, free hanging, crimp termination, -25°C to 85°C.

$0.1900Ref. price · indicative, final on quote
PAP-04V-S datasheet
StockIn Stock (17)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

PAP-04V-S Technical Specifications
ParameterValue
SeriesPA
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Lock
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.079\" (2.00mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions4

Product details

Wiring a 4-Circuit Harness with the PAP-04V-S

The natural PA66 body handles -25°C to 85°C, which covers interior automotive, appliance, and industrial control cabinet environments. For a 4-circuit harness, this housing is the wire-side half that mates to the board-mounted header.

Selecting the Right Position Count

If your BOM calls for 5 circuits, the PAP-05V-S uses the same housing material, latch lock, and crimp terminal — only the cavity count changes. The 4-position version keeps the harness compact for a 4-wire run; stepping up to 5 or 6 positions (PAP-06V-S) adds length along the same single-row footprint without changing the header pitch or terminal type.

Terminal and Header Compatibility

This housing accepts JST PA-series female crimp terminals — order those separately as the note states. The crimp termination suits automated or bench harness assembly; strip the wire, crimp the terminal, insert until the latch seats.

Sourcing the PAP-04V-S

No official cross-reference or direct second-source is on record; the PA series is a JST standard, so the housing, header, and terminals are a single-vendor set.

Frequently asked questions

What contacts are compatible with PAP-04V-S?

The PAP-04V-S accepts JST PA-series female socket crimp terminals. The housing ships without contacts — you must order the terminals separately for your wire gauge.

Is PAP-04V-S compatible with B04B-PASK header?

Yes, the PAP-04V-S mates with the JST B04B-PASK pin header. Both share the 2.00 mm pitch and 4-position count, and the latch lock on the housing engages the header for a secure connection.