The JST PHR-5 is a 5-position receptacle housing from the PH series, a widely-used 2.00 mm pitch wire-to-board connector family. It accepts female crimp socket contacts and terminates to discrete wires for free-hanging (in-line) mating with a pin header. The natural polyamide (PA66) housing carries a detent lock for positive retention against vibration. This is a housing only — contacts are ordered separately, which is standard for JST PH series receptacles.
The 2.00 mm pitch is the standard for JST PH series, giving a compact footprint that suits dense PCB layouts while maintaining adequate creepage for low-voltage signal and power applications. The single-row 5-position layout matches a 5-circuit BOM line — confirm the mating pin header has the same position count and pitch. The detent lock provides an audible click on full mate, which helps field techs verify connection without a tug test.
Mating and Termination
This housing mates with JST PH series pin headers at the same 2.00 mm pitch. The female socket contacts are crimped onto wire and inserted into the rear of the housing; the detent lock holds the terminal in place.
Sourcing and Compliance
The product status is Active and ROHS3 Compliant.
How It Compares to Siblings
The PHR-5 is the 5-position member of the PH series receptacle housings. Pick the position count that matches your circuit count; the housing family is otherwise identical across variants.