Skip to main content
Log in
S05B-PASK-2 — JST product photo
JST

S05B-PASK-2 JST PA Header, 5 Pos, 2mm, Right Angle

MPNS05B-PASK-2
Active

JST PA series, Board to Cable/Wire, Header, Male Pin, 5 Positions, 2.00mm Pitch, Through Hole Right Angle, Shrouded 4 Wall, Locking Ramp, Tin Contacts, 3A, 250V, UL94 V-0, Bulk

$0.5200Ref. price · indicative, final on quote
S05B-PASK-2 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S05B-PASK-2 Technical Specifications
ParameterValue
SeriesPA
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.256\" (6.50mm)
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions5
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.126\" (3.20mm)

Product details

2.00 mm pitch, 5-position right-angle header with locking ramp

The S05B-PASK-2 is a JST PA series 5-position single-row header on 2.00 mm pitch, terminated through-hole in a right-angle orientation — the cable exits parallel to the board, saving vertical clearance in tight enclosures.

Board-fit and routing details

The right-angle solder tails are kinked for retention through wave solder; the 0.134" (3.40 mm) post length suits standard PCBs. Insulation height of 0.256" (6.50 mm) leaves room under the shroud for the mating housing latch.

ROHS3 compliant; bulk packaged.

Frequently asked questions

What is the pitch of S05B-PASK-2?

The S05B-PASK-2 uses a 2.00 mm (0.079") pitch between contacts.

Is S05B-PASK-2 RoHS compliant?

Yes, it is ROHS3 compliant.

What is the mounting style of S05B-PASK-2?

Through-hole, right-angle mounting — the header sits perpendicular to the board and the cable exits parallel to the PCB.

What is the S05B-PASK-2 mating connector?

Mates with JST PA series crimp housings (e.g., the PAP-05V-S receptacle) using the appropriate PA crimp terminals.