Skip to main content
Log in
S08B-PUDSS-1 — JST product photo
JST

JST S08B-PUDSS-1 Header – 2mm Pitch, 8 Pos, R/A, Latch

MPNS08B-PUDSS-1
Active

JST PUD series, S08B-PUDSS-1, Board to Cable/Wire header, 8 circuits, 2.00mm pitch, through-hole right-angle, shrouded 4-wall, latch holder, 3A, 250V, UL94 V-0.

$0.4900Ref. price · indicative, final on quote
S08B-PUDSS-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S08B-PUDSS-1 Technical Specifications
ParameterValue
SeriesPUD
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.335\" (8.51mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions8
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.118\" (3.00mm)
Contact finish - matingTin

Product details

Board-to-wire header with latch retention

The S08B-PUDSS-1: This is an 8-position, 2.00mm pitch header from JST's PUD series, designed for board-to-cable/wire connections. A full 4-wall shroud protects the male pins during handling, and the latch holder on the top locks with the mating receptacle housing for vibration-resistant mating.

Current, voltage, and temperature envelope

Both the mating contact finish and the post finish are tin-plated, which suits moderate mating-cycle applications where cost per circuit matters more than cycle life.

Frequently asked questions

Where can I buy S08B-PUDSS-1?

Submit an RFQ for current pricing and lead time — availability is confirmed at quote time, not held on the shelf.

Is S08B-PUDSS-1 RoHS compliant?

No, S08B-PUDSS-1 is listed as RoHS non-compliant. If your application requires RoHS compliance, check the S14B-PUDSS-1(LF)(SN) variant which includes a lead-free suffix.

What is the mating connector for S08B-PUDSS-1?

This header mates with JST PUD series receptacle housings that accept the appropriate crimp terminals. The latch holder on the header locks with the receptacle's latch feature for secure mating.