The S08B-ZESK-2D(T)(LF)(SN): This is an 8-position, single-row header on a 0.059" (1.50 mm) pitch — a compact footprint that routes signal traces between the pins without necking down to sub-0.2 mm track widths.
This header mates with JST ZE series crimp receptacle housings (sold separately). The kinked solder posts provide through-hole retention during wave soldering — the kink acts as a standoff, holding the header flush against the board during reflow. Tin is suitable for solder joints and for environments where the connector is mated fewer than 50 times over its life.