JST PAD series, 10-position, 2.00 mm pitch, through-hole right-angle header, shrouded 4-wall, locking ramp, tin-plated contacts, 3 A, 250 V, UL94 V-0 natural PBT housing.
| Parameter | Value |
|---|---|
| Series | PAD |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.413\" (10.49mm) |
| Insulation material | Polybutylene Terephthalate (PBT), Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 10 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.118\" (3.00mm) |
| Contact finish - mating | Tin |
The S10B-PADSS-1(LF)(SN): Tin plating is the standard choice for applications with fewer than 25 mating cycles — it's cheaper than gold and adequate for one-time assembly or occasional field swap.
The S20B-PADSS-1 is the 20-position sibling in the same PAD series — same 2.00 mm pitch, same right-angle orientation, same 3 A/250 V rating and locking ramp.
This header mates with JST PAD series crimp-socket receptacles (board-to-cable/wire style).