Skip to main content
Log in
S11B-XH-A — JST product photo
JST

S11B-XH-A JST XH Series Header – 11 Pos, 2.5 mm Pitch

MPNS11B-XH-A
Active

JST XH series, 11-position single-row header, 2.50 mm pitch, right-angle through-hole, tin-plated male pins, shrouded 4-wall housing with detent lock, UL94 V-0.

$0.6700Ref. price · indicative, final on quote
S11B-XH-A datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S11B-XH-A Technical Specifications
ParameterValue
SeriesXH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.240\" (6.10mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions11
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

Pitch and footprint for board layout

The S11B-XH-A: Right-angle through-hole termination orients the header parallel to the board, saving z-height in space-constrained enclosures while the 0.134" post length provides a solid solder anchor.

Mating and retention in the XH series

The shrouded 4-wall housing with detent lock mates with standard XH series crimp receptacles — the lock provides audible feedback and holds the pair mated under moderate vibration without a secondary latch. All 11 positions are loaded with square tin-plated male pins; the tin-on-tin interface is rated for repeated mating cycles typical of field-service harness connections.

Sourcing and compliance note

This header is RoHS non-compliant — confirm your assembly's regulatory requirements before committing the BOM line.

Frequently asked questions

What is the pin pitch of S11B-XH-A?

The mating pitch is 0.098" (2.50 mm), which sets the PCB footprint and the per-contact current ceiling at 3 A.

Is S11B-XH-A RoHS compliant?

No — this header is listed as RoHS non-compliant, so it is not suitable for assemblies requiring RoHS certification.

What is the current rating of S11B-XH-A?

Rated 3 A per contact with tin-plated mating surfaces, which limits it to signal-level duty rather than power distribution.