JST PH series header, order code S12B-PH-K-S, 12 positions, single row, 2.00 mm pitch, 2 A, 100 V, tin-plated mating contacts, through hole right angle, press-fit solder termination.
| Parameter | Value |
|---|---|
| Series | PH |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.189\" (4.80mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
The S12B-PH-K-S is the 12-circuit member of JST's PH series board-to-wire header line, mating with PH-series crimp housings. Contacts are tin-plated brass, rated 2 A per circuit at 100 V, and the shrouded 4-wall design with detent lock prevents mis-mating under vibration.
Termination is through hole right angle with press-fit solder tails 3.40 mm long.
The S12B-PH-K-S mates with JST PH series crimp housings in the same 12-circuit, 2.00 mm pitch format. The detent lock on the header engages the housing latch.
RoHS and REACH compliance documentation is provided by JST Sales America Inc.