Skip to main content
Log in
S13B-XH-A-1 — JST product photo
JST

JST S13B-XH-A-1 Header 13 Pos Right Angle 2.5mm Pitch

MPNS13B-XH-A-1
Active

JST XH series, Board to Cable/Wire header, 13 positions, 1 row, 0.098" (2.50mm) pitch, Through Hole, Right Angle, Tin contacts, UL94 V-0, Active

$0.8000Ref. price · indicative, final on quote
S13B-XH-A-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S13B-XH-A-1 Technical Specifications
ParameterValue
SeriesXH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.240\" (6.10mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions13
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

Board-to-cable header for tight enclosures

The S13B-XH-A-1: This JST XH series header carries 13 circuits on a single row at 0.098" (2.50mm) pitch, terminated through-hole and right-angle to the board. Tin-on-tin contact finish suits moderate-cycle applications where gold flash isn't needed.

Footprint and mounting check

The 0.134" (3.40mm) post length seats into a standard through-hole footprint. The press-fit tails add mechanical retention before wave solder. For a 14-position version of the same pitch and orientation, the S14B-XH-A is the next step up.

Frequently asked questions

Is S13B-XH-A-1 RoHS compliant?

No, this part is listed as RoHS non-compliant. For a RoHS-compliant version, the S13B-XH-A-1(LF)(SN) carries the same electrical and mechanical specs with lead-free plating.

Does S13B-XH-A-1 have a detent lock?

Yes, the fastening type is a detent lock, providing audible and tactile feedback when the mating plug is fully seated.