Skip to main content
Log in
S14B-PH-K-S — JST product photo
JST

S14B-PH-K-S JST PH Series 14-Pin 2mm Right-Angle Header

MPNS14B-PH-K-S
Active

JST Sales America Inc. PH series, 14-position, 2.00mm pitch, through-hole right-angle header, shrouded 4-wall, detent lock, tin-plated male pins, UL94 V-0, 2 A, 100 V.

$0.6300Ref. price · indicative, final on quote
S14B-PH-K-S datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S14B-PH-K-S Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.189\" (4.80mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions14
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

14-position, 2.00 mm pitch right-angle header for board-to-wire

It is a through-hole, right-angle component intended for board-to-wire applications.

Mounting and termination: through-hole right-angle with press-fit option

The header mounts through-hole, right-angle to the PCB, with a contact post length of 0.134" (3.40 mm) for the solder tail. Termination is listed as press-fit and solder, meaning the pins are designed for a press-fit interference fit in the plated hole, with solder as a secondary bond. The insulation height of 0.189" (4.80 mm) and mating contact length of 0.130" (3.30 mm) define the mated stack height with the corresponding PH receptacle.

Frequently asked questions

Is the S14B-PH-K-S RoHS compliant?

No, the S14B-PH-K-S is listed as RoHS non-compliant. The alternate MPN S14B-PH-K-S(LF)(SN) is the RoHS-compliant equivalent with the same specifications.

What is the mating connector for the S14B-PH-K-S?

This header mates with JST PH series crimp-style receptacle housings and their matching crimp terminals.

Where can I buy S14B-PH-K-S available via RFQ confirmation?

Sourced to order against BOM quantities.