Skip to main content
Log in
S16B-PUDSS-1 — JST product photo
JST

S16B-PUDSS-1 JST 16-Pin Header, 2mm Pitch, Right Angle

MPNS16B-PUDSS-1
Active

JST PUD series, Board to Cable/Wire, Header, Male Pin, 16 Positions, 2.00mm Pitch, Through Hole Right Angle, Solder Termination, Latch Holder, Tin Mating Finish, UL94 V-0, -25°C to 85°C, 3A, 250V

$0.8100Ref. price · indicative, final on quote
S16B-PUDSS-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S16B-PUDSS-1 Technical Specifications
ParameterValue
SeriesPUD
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.335\" (8.51mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions16
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.118\" (3.00mm)
Contact finish - matingTin

Product details

The S16B-PUDSS-1 is a 16-position, 2-row header from JST's PUD series, on a 2.00mm pitch.

Pitch, Positions, and Mating Half

The 2.00mm pitch and 2-row layout with 0.079" row spacing give a compact footprint that balances routing density with ease of soldering. All 16 positions are loaded. The mating half is a JST PUD series receptacle housing with crimp socket terminals. The 4-wall shrouding guides the receptacle into alignment during mating. The square male pins (Copper Alloy) mate with standard PUD crimp terminals.

The 0.118" (3.00mm) post length is standard for through-hole soldering on typical 1.6mm boards. A board guide feature helps align the header during soldering and prevents skew during mating, which is helpful in automated pick-and-place or wave-solder processes.

Sourced per RFQ — confirm current pricing and availability at quote time.

Frequently asked questions

What is the pin pitch and number of pins on S16B-PUDSS-1?

The pitch is 2.00mm (0.079") and the header has 16 positions in 2 rows, all loaded.

Does S16B-PUDSS-1 have a latch or locking mechanism?

Yes, it uses a latch holder fastening type, which locks the header to the mating receptacle housing for vibration resistance.

What mating connector housing is compatible with S16B-PUDSS-1?

It mates with JST PUD series receptacle housings (e.g., PUD-16P) using crimp socket terminals. The 4-wall shrouding guides alignment.

Is S16B-PUDSS-1 RoHS compliant?

No, this part is RoHS non-compliant. Verify your regulatory requirements before ordering.