JST PUD series, Board to Cable/Wire header, 22 circuits, 2.00mm pitch, through-hole right-angle, shrouded 4-wall with latch holder, tin-plated contacts, UL94 V-0 natural nylon housing
| Parameter | Value |
|---|---|
| Series | PUD |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.335\" (8.51mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 22 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.118\" (3.00mm) |
| Contact finish - mating | Tin |
A latch holder on the top locks the pair together—hand-tight should seal it, but that latch means a half-turn loose is a dropout won't happen here. The tin-on-tin contact finish (mating and post) is standard for cost-sensitive, moderate-cycle applications—expect a few dozen mating cycles before the tin wears.
This header mates with JST PUD series crimp-style receptacle housings.
The S22B-PUDSS-1 mates with JST PUD series crimp-style receptacle housings. The latch on the header engages with the receptacle's locking slot for a vibration-resistant connection.
Submit an RFQ for current pricing and lead time—confirmed at quote time from multiple distribution channels.