Skip to main content
Log in
S2B-EH — JST product photo
JST

JST S2B-EH Header 2.5mm Pitch 2-Pos R/A Shrouded Latch Lock

MPNS2B-EH
Active

JST Sales America Inc. EH series, Board to Cable/Wire, Header, 2 positions, 2.50mm pitch, Through Hole Right Angle, Shrouded - 3 Wall, Latch Lock, Tin contacts, 3A, 250V, UL94 V-0

$0.1800Ref. price · indicative, final on quote
S2B-EH datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S2B-EH Technical Specifications
ParameterValue
SeriesEH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.165\" (4.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 3 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions2
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Contact finish - matingTin
Contact length - mating0.157\" (4.00mm)

Product details

2.50mm pitch right-angle header for wire-to-board harnesses

The 3-wall shroud guides the mating half and protects the square pins from bending during blind mating or field service.

Through-hole press-fit and solder termination: the 0.126" (3.20mm) post length suits standard 1.6mm PCBs. The square pin profile (0.157" / 4.00mm mating length) provides a consistent contact wipe with the receptacle terminal. Insulation height of 0.165" (4.20mm) above the board — check clearance against adjacent components if the receptacle has a backshell or wire exit on the same side.

ROHS3 compliant.

Frequently asked questions

What is the pitch and mounting type of S2B-EH?

2.50mm pitch, through-hole right-angle mounting. The 0.126" (3.20mm) post length fits standard 1.6mm PCBs.

Does S2B-EH have a latch lock?

Yes, the fastening type is Latch Lock. It provides positive retention with the mating EH receptacle housing.