JST PH series header, order code S2B-PH-K-S, 2 positions, single row, 2.00 mm pitch, 2 A, 100 V, tin-lead mating contacts, through-hole right-angle, press-fit solder termination.
| Parameter | Value |
|---|---|
| Series | PH |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.189\" (4.80mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 2 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin-Lead |
| Contact length - mating | 0.130\" (3.30mm) |
The S2B-PH-K-S is the 2-circuit member of JST's PH series board-to-wire header line, shrouded on four walls with a detent lock for positive retention. Rated 2 A per contact at 100 V, the header carries tin-lead mating contacts and mounts through-hole right-angle with press-fit solder termination.
Quantities are sourced per RFQ against the BOM — availability confirmed at quote stage.
The S2B-PH-K-S is Obsolete per JST. It is available through independent surplus channels; quantities are lot-specific and confirmed at RFQ against the BOM quantity.