Skip to main content
Log in
S2B-ZR-SM4A-TF — JST product photo
JST

S2B-ZR-SM4A-TF JST ZH 1.5mm Pitch 2-Pin SMT Right-Angle

MPNS2B-ZR-SM4A-TF
Active

JST Sales America Inc., ZH series, Board to Cable/Wire header, 2 positions, 1.50mm pitch, Surface Mount Right Angle, shrouded 4-wall, detent lock, 1A, 50V, UL94 V-0, Tape & Reel.

$0.5600Ref. price · indicative, final on quote
S2B-ZR-SM4A-TF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S2B-ZR-SM4A-TF Technical Specifications
ParameterValue
SeriesZH
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating50V
Current rating1A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.146\" (3.70mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeCircular
Rows1
Pitch0.059\" (1.50mm)
Positions2
Contact finish - postTin
Contact finish - matingTin

Product details

ZH series 2-position SMT right-angle header

Rated at 1 A per contact and 50 V, this header is intended for signal-level interconnects, not power delivery.

SMT footprint and solder retention

The surface-mount right-angle termination requires a PCB footprint matching the 1.50mm pitch and the specified pad layout.

Position count delta vs. sibling

The S3B-ZR-SM4A-TF is the 3-position sibling in the same SMT right-angle format, same 1.50mm pitch, same 1 A rating. If your BOM calls for 3 circuits, the S3B-ZR-SM4A-TF is a direct swap without footprint changes.

Frequently asked questions

What is the pitch of S2B-ZR-SM4A-TF?

The mating pitch is 0.059" (1.50mm). This is the center-to-center spacing between adjacent pins.

Is S2B-ZR-SM4A-TF compatible with standard ZH connectors?

Yes, this header is part of the JST ZH series and mates with standard ZH crimp receptacles (e.g., ZHR-2) using the appropriate crimp terminals (e.g., SZH-002T-P0.5). The detent lock engages with the receptacle's locking ramp.