JST XH series, 3-position shrouded header, 2.50 mm pitch, right-angle through-hole, tin-plated male pins, detent lock, UL94 V-0, rated 3 A at 250 VAC/DC.
| Parameter | Value |
|---|---|
| Series | XH |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 250VAC/DC |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.240\" (6.10mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Box |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
The S3B-XH-A-E: A detent lock on the shroud secures the mating XH housing against vibration-induced disconnection. The 4-wall shrouding protects the pins during handling and mis-mating. Termination is press-fit and solder — the press-fit feature holds the header in place during wave soldering, reducing board-side handling issues.
Yes, the S3B-XH-A-E is listed as RoHS compliant by JST Sales America Inc.
The S3B-XH-A-E mates with JST XH series crimp-style receptacle housings (e.g., XHP-3) using the appropriate crimp terminals (e.g., SXH-001T-P0.6). The detent lock on the header engages with the housing latch.