Skip to main content
Log in
S5B-PH-SM4-TB — JST product photo
JST

S5B-PH-SM4-TB JST PH Header, 5 Pos, 2 mm, SMD RA, Active

MPNS5B-PH-SM4-TB
Active

JST Sales America Inc. PH series, Board to Cable/Wire, Header, Male Pin, 5 Positions, 0.079" (2.00mm) Pitch, Surface Mount, Right Angle, Shrouded - 4 Wall, Detent Lock, 2 A, 100 V, UL94 V-0, Active, RoHS non-compliant.

$0.8200Ref. price · indicative, final on quote
S5B-PH-SM4-TB datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S5B-PH-SM4-TB Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.217\" (5.51mm)
Insulation materialPolyamide (PA6T), Nylon 6T
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions5
Contact finish - postTin
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

It mates with the standard PH crimp housing (e.g., PHR-5) to form a board-to-cable/wire connection. The tin-plated contacts are suited for moderate-cycle applications where gold's higher mating cycle life isn't required.

Mounting and mating checklist

Surface-mount, right-angle termination. The S5B-PH-SM4-TB uses solder tails for reflow attachment. Mates with JST PH series crimp housings such as PHR-5 (5-position) and the corresponding SPH-002T-P0.5S crimp terminal for 24-28 AWG wire.

RoHS non-compliant — check your assembly's restricted-material requirements before committing. The insulation material is PA6T (Nylon 6T), rated UL94 V-0.

Position count contrast: S5B vs S6B vs S4B

The S5B-PH-SM4-TB (5 positions) sits between the 4-position S4B-PH-SM4-TB and the 6-position S6B-PH-SM4-TB.

Frequently asked questions

Is S5B-PH-SM4-TB compatible with JST PH series crimp housing?

Yes. The S5B-PH-SM4-TB is a PH series header designed to mate with standard PH crimp housings like the PHR-5 (5-position). Use the matching SPH-002T-P0.5S terminal for 24-28 AWG wire.

What is the mounting style of S5B-PH-SM4-TB?

Surface mount, right angle. The header sits perpendicular to the PCB, with solder tails for reflow attachment.

What is the replacement for S5B-PH-SM4-TB if out of stock?

No direct replacement is listed. The closest functional alternative is the S6B-PH-SM4-TB (6 positions) or S4B-PH-SM4-TB (4 positions) from the same PH series — but verify your BOM position count first.

Is S5B-PH-SM4-TB RoHS compliant?

No. The S5B-PH-SM4-TB is marked RoHS non-compliant. If your assembly requires RoHS compliance, consider the S4B-PH-SM4-TB(LF)(SN) variant (4 positions, RoHS compliant) or check for a lead-free version of the 5-position.