JST Sales America Inc. PH series header, order code S6B-PH-K-S, 6 positions, single row, 2.00 mm pitch, 2 A, 100 V, tin-plated mating contacts, through-hole right-angle, press-fit solder termination.
| Parameter | Value |
|---|---|
| Series | PH |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.189\" (4.80mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 6 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
The S6B-PH-K-S: A detent lock on the shroud secures the mating receptacle against vibration-induced disconnect. Mating contacts are tin-plated brass; the tin finish matches the PH-series receptacle terminals for a fretting-compatible interface at moderate mating-cycle counts.
The S6B-PH-K-S mates with JST PH-series crimp receptacle housings that accept the same 2.00 mm pitch contacts. The detent lock on the shroud engages the matching latch on the receptacle.
The S6B-PH-K-S is a JST Sales America Inc. product. The housing material is UL94 V-0 rated polyamide 66. RoHS and REACH compliance documentation is provided by JST; contact JST directly for specific certificates.