The JST SHR-11V-S is an 11-position receptacle housing from the SH series, built on a 1.00 mm pitch. It is a single-row, free-hanging (in-line) housing that accepts female socket crimp terminals — the contacts are ordered separately. This is the housing half of a wire-to-board interconnect; it mates with the matching SH series pin header (through-hole or SMT) to route signals or low-current power across a harness assembly.
Why the 1.00 mm Pitch and 11 Positions Matter for Fit
The 1.00 mm pitch is the tightest common spacing for a crimp-style wire-to-board connector — it keeps the board footprint small, but it also limits the wire gauge range and current per circuit. At this pitch, the typical SH series terminal handles around 1 A per contact (class-level rating; not in the spec table for this housing). The 11-position count is the BOM line match: if your circuit count is 11, this housing is the correct number of cavities. The single-row layout keeps the connector narrow, which helps in space-constrained enclosures.
Contacts Are Ordered Separately — What You Need
The SHR-11V-S ships as an empty housing — no contacts included. This is the most common sourcing miss. You need to order the matching SH series female crimp terminals separately.