JST NSH series, 4-position header, 1.00 mm pitch, 1 A, 50 V, surface-mount right-angle, shrouded with latch holder, tin-plated contacts, UL94 V-0 natural nylon.
| Parameter | Value |
|---|---|
| Series | NSH |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.173\" (4.40mm) |
| Insulation material | Polyamide (PA), Nylon |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 4 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The SM04B-NSHSS-TB (LF)(SN): Rated 50 V and 1 A per circuit, it's a signal-level interconnect — think sensor inputs, low-power I/O, or control lines where you don't need the current headroom of a larger pitch.
Solder retention feet anchor the header during reflow and resist shear force from the cable strain after assembly.
Yes, it carries RoHS compliance — no conflict with EU or similar restricted-substance regulations.
That's a signal-level rating — adequate for sensor inputs, control lines, or low-power I/O, not for power distribution.