JST NSH series, 6-position, 1.00mm pitch, surface-mount right-angle header, tin-plated male pins, latch holder, 1 A, 50 V, UL94 V-0 natural nylon.
| Parameter | Value |
|---|---|
| Series | NSH |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.173\" (4.40mm) |
| Insulation material | Polyamide (PA), Nylon |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 6 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The SM06B-NSHSS-TB (LF)(SN): Rated 50 V and 1 A per contact, with tin-on-tin contact finish — suited for low-power signal and control harnesses where mating cycles are moderate.
The SM06B-NSHSS-TB (LF)(SN) is a 6-position header; the sibling SM07B-NSHSS-TB (LF)(SN) carries 7 positions at the same 1.00 mm pitch, same right-angle SMT orientation, same 1 A and 50 V ratings.
Engineers need pitch, mounting, row count, and fastening details to validate fit.
Buyers need to quickly find a distributor with inventory to avoid project delays.
RoHS compliance is mandatory for most electronics; missing info can disqualify a part.
Techs and engineers must know the compatible wire housing and crimp terminals.
Sourcers need lead time to ensure supply chain readiness.
Procurement may need alternative parts if the original is unavailable or EOL.