JST PA series, 7-position, 2.00 mm pitch, right-angle SMT header, shrouded 4-wall, locking ramp, tin-plated male pins, 3 A, 250 V, UL94 V-0, natural (beige) insulation.
| Parameter | Value |
|---|---|
| Series | PA |
| Gender | Male Pin |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.224\" (5.69mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Pick and Place, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 7 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The locking ramp on the shroud engages with the PA receptacle latch, providing positive retention against cable pull and vibration. Pick-and-place compatible packaging (Tape & Reel, Cut Tape) simplifies automated assembly.
The 7-position count is the key selector within the PA right-angle SMT family.
SM07B-PASS is the base number without the -TBT suffix; the -TBT indicates Tape & Reel packaging. The electrical and mechanical specs are identical – the only difference is the reeled packaging for automated pick-and-place.
The header is a single row of 7 male pins at 2.00 mm pitch. Pin 1 is typically marked by a chamfer or dot on the housing – refer to the JST PA series product drawing for the exact pin numbering orientation relative to the locking ramp.