Skip to main content
Log in
SM11B-SHLS-TF(LF)(SN) — JST product photo
JST

JST SM11B-SHLS-TF(LF)(SN) 11-Position 1mm SMT Header

MPNSM11B-SHLS-TF(LF)(SN)
Active

JST SHL series, 11-position, 1.00mm pitch, right-angle surface-mount header, shrouded 4-wall, tin-plated contacts, rated 1A per contact at 50V, UL94 V-0 natural nylon housing.

$1.0000Ref. price · indicative, final on quote
SM11B-SHLS-TF(LF)(SN) datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

SM11B-SHLS-TF(LF)(SN) Technical Specifications
ParameterValue
SeriesSHL
GenderOuter Shroud Contact
Mounting typeSurface Mount, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating50V
Current rating1A
Operating temperature-25°C ~ 85°C
Contact materialPhosphor Bronze
Insulation colorNatural
Insulation height0.069\" (1.75mm)
Insulation materialPolyamide (PA), Nylon
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeRectangular
Rows1
Pitch0.039\" (1.00mm)
Positions11
Contact finish - postTin
Contact finish - matingTin

Product details

What this SHL header is for

The SM11B-SHLS-TF(LF)(SN): This is an 11-position, single-row, right-angle SMT header from JST's SHL series — a 1.00 mm pitch board-to-cable/wire interconnect.

No through-hole posts — all connections are surface-mount only.

This header mates with JST SHL series crimp-style receptacle housings. The push-pull fastening engages with the mating half's latch; the shrouded 4-wall guides the receptacle into alignment. Termination is solder — the SMT pads on the PCB accept the header's solder tails.

Frequently asked questions

What is the mating connector for JST SM11B-SHLS-TF(LF)(SN)?

This header mates with JST SHL series crimp receptacle housings. The mating half uses the same 1.00 mm pitch and push-pull latch interface. Confirm the circuit count matches — the 11-position header requires an 11-position receptacle.