Skip to main content
Log in
JST SM11B-SHLS-TF(LF)(SN) — Pin Headers

JST SM11B-SHLS-TF(LF)(SN) 11-Position 1mm SMT Header

MPNSM11B-SHLS-TF(LF)(SN)
Active

JST SHL series, 11-position, 1.00mm pitch, right-angle surface-mount header, shrouded 4-wall, tin-plated contacts, rated 1A per contact at 50V, UL94 V-0 natural nylon housing.

$1.0000Ref. price · indicative, final on quote
JST SM11B-SHLS-TF(LF)(SN) datasheet (PDF)
RoHSROHS3 Compliant
SeriesSHL
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SM11B-SHLS-TF(LF)(SN) key specifications
ParameterValue
SeriesSHL
TypeOuter Shroud Contact
MountingSurface Mount, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating50V
Current rating1A
Operating temperature-25°C ~ 85°C
Contact materialPhosphor Bronze
Insulation colorNatural
Insulation height0.069\" (1.75mm)
Insulation materialPolyamide (PA), Nylon

All specifications

SM11B-SHLS-TF(LF)(SN) additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeRectangular
Rows1
Pitch0.039\" (1.00mm)
Positions11
Contact finish - postTin
Contact finish - matingTin

Product details

What this SHL header is for

The SM11B-SHLS-TF(LF)(SN): This is an 11-position, single-row, right-angle SMT header from JST's SHL series — a 1.00 mm pitch board-to-cable/wire interconnect.

No through-hole posts — all connections are surface-mount only.

This header mates with JST SHL series crimp-style receptacle housings. The push-pull fastening engages with the mating half's latch; the shrouded 4-wall guides the receptacle into alignment. Termination is solder — the SMT pads on the PCB accept the header's solder tails.

Frequently asked questions

What is the mating connector for JST SM11B-SHLS-TF(LF)(SN)?

This header mates with JST SHL series crimp receptacle housings. The mating half uses the same 1.00 mm pitch and push-pull latch interface. Confirm the circuit count matches — the 11-position header requires an 11-position receptacle.