The SM15B-SRSS-TB: The 1.00 mm pitch sets a tight board footprint — the 15 pads sit in a single row, so the connector body occupies about 15 mm of board edge. Right-angle orientation routes the mated cable flat against the PCB, keeping the z-height under the insulation height of 2.90 mm.
Current and voltage — signal duty only
This is a signal-level connector — the tin-on-tin contact interface and 1.00 mm pitch keep the current ceiling low.
This header mates with JST SR series crimp receptacles — the matching housing is a 15-position SR side-entry or top-entry receptacle using the SSH-003T-P0.2 contact terminal. Part of the SH/SR series, which covers 1.00 mm pitch wire-to-board interconnects up to 20 positions.
Tape and Reel packaging for automated placement; cut tape available for prototypes.