The SM26B-ZPDSS-TF(LF)(SN): This is the board-mounted male half of the ZPD wire-to-board system. The outer shroud contact type means the signal path goes through the shroud walls, not through individual pin barrels — check the mating receptacle's contact layout to confirm compatibility.
Active Production — Sourcing This Part
RoHS compliant and lead-free per the (LF)(SN) suffix. Supplied in Tape & Reel for automated pick-and-place; also available in Cut Tape for prototype runs.
The SM24B-ZPDSS-TF shares the same 1.50 mm pitch, 2 A rating, right-angle SMT orientation, locking ramp, and UL94 V-0 housing — the only difference is 24 positions vs 26. If your harness needs fewer circuits, the 24-position version drops in without a board layout change.