JST VH series receptacle housing, 10 positions, 1 row, 0.156" (3.96mm) pitch, natural, free-hanging, latch lock, crimp termination, contacts not included.
| Parameter | Value |
|---|---|
| Series | VH |
| Type | Female Socket |
| Mounting | Free Hanging (In-Line) |
| Connector type | Receptacle |
| Fastening type | Latch Lock |
| Operating temperature | -25°C~85°C |
| Color | Natural |
| Note | Contacts Not Included |
| Pitch | 0.156\" (3.96mm) |
| Package | Bulk |
| Rows | 1 |
| Contact termination | Crimp |
| Positions | 10 |
It accepts female crimp sockets terminated to discrete wires, then mates with a VH series pin header soldered to the PCB.
The matching crimp terminal is ordered separately, depending on wire gauge.
The VHR-10N shares the same 3.96 mm pitch, single-row layout, latch-lock fastening, and natural housing as the VHR-6N. The only decision-relevant difference is position count: 10 circuits vs 6 circuits.
No, the VHR-10N receptacle housing ships without contacts. The listing explicitly states "Contacts Not Included." You need to order the matching crimp terminals separately, such as JST SVH-21T-.1, sized for the wire gauge in your harness.
This is the center-to-center spacing between positions, which determines the footprint of the mating header on the PCB.