Skip to main content
Log in
XADR-36V — JST product photo
JST

JST XADR-36V Receptacle, 36 Pos, 2.50mm Pitch, Panel Mount

MPNXADR-36V
Active

JST XAD series receptacle, XADR-36V, 36 positions, dual row, 0.098" (2.50mm) pitch, panel mount snap-in, latch lock, crimp termination, natural PA66 housing.

$1.4000Ref. price · indicative, final on quote
StockIn Stock (14)
Lead time3-5 Days wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

XADR-36V Technical Specifications
ParameterValue
SeriesXAD
GenderFemale Socket
Mounting typePanel Mount, Snap-In
Connector typeReceptacle
Fastening typeLatch Lock
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.098\" (2.50mm)
PackageBulk
Row spacing0.098\" (2.50mm)
Rows2
Contact terminationCrimp
Positions36

Product details

36-Circuit Dual-Row Receptacle for the JST XAD Series

The JST XADR-36V is the 36-position receptacle half of the XAD series, a dual-row wire-to-board interconnect system on a 0.098" (2.50mm) pitch with matching 0.098" (2.50mm) row spacing.

Pitch, Position Count, and Mating Header Fit

With 36 positions across two rows at 0.098" (2.50mm) pitch and row spacing, this receptacle mates with the corresponding XAD series pin header of the same position count and pitch. The dual-row layout gives a compact footprint for a 36-circuit harness — the board-side header must match both the row count and the 0.098" (2.50mm) pitch to align correctly.

Mounting and Termination — Panel Snap-In with Crimp Contacts

The XADR-36V is designed for panel mount, snap-in installation — the housing presses into a rectangular cutout and the integral latches hold it in place without hardware. The latch lock on the mating face secures the header once plugged.

Frequently asked questions

What contacts fit the JST XADR-36V?

The XADR-36V is a receptacle housing only — contacts are not included. You need to order the matching female crimp socket terminals from the JST XAD series separately. The contact termination type is crimp, so select the terminal that matches your wire gauge and the XAD series specification.

What is the pitch and row spacing of the XADR-36V?

The XADR-36V uses a 0.098" (2.50mm) pitch between contacts and the same 0.098" (2.50mm) spacing between the two rows. This matches the XAD series pin headers of the same position count.