Skip to main content
Log in
XADRP-26V — JST product photo
JST

JST XADRP-26V 26-Pin Receptacle Housing, 2.50mm Pitch

MPNXADRP-26V
Active

JST XAD series receptacle housing, XADRP-26V, 26 positions, 2 rows, 0.098" (2.50mm) pitch, natural PA66, free hanging in-line mount, latch lock, crimp termination, contacts not included.

$0.4100Ref. price · indicative, final on quote
XADRP-26V datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

XADRP-26V Technical Specifications
ParameterValue
SeriesXAD
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Lock
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.098\" (2.50mm)
PackageBulk
Row spacing0.098\" (2.50mm)
Rows2
Contact terminationCrimp
Positions26

Product details

26-Circuit Dual-Row Housing for XAD Series

The JST XADRP-26V is the 26-position receptacle housing in the XAD series, a dual-row wire-to-wire or wire-to-board interconnect family built around a 0.098" (2.50mm) pitch.

Why the 26-Position Count Matters for BOM Fit

For a harness build that needs 26 signal or low-power lines, the XADRP-26V is the correct BOM line; stepping down to the 24-position variant means losing two circuits and re-laying out the harness. No other spec changes between the position variants, so the same crimp terminals and mating headers apply across the family.

This is standard for JST XAD series housings — the terminal part number is not the same as the housing, so the BOM needs both. For a production run, factor in the terminal quantity (26 per housing) plus a scrap allowance for the crimp process.

The XAD series is a standard JST family with broad channel coverage.

Frequently asked questions

What contacts/terminals are used with JST XADRP-26V housing?

The XADRP-26V accepts female socket crimp terminals, but the terminals are not included with the housing. The specific JST terminal part number for the XAD series must be ordered separately — the housing and terminal are distinct BOM lines.

What header mates with XADRP-26V?

The XADRP-26V mates with the matching XAD series pin header. Both use the same 0.098" (2.50mm) pitch and dual-row layout, with the latch lock on the housing engaging the header's locking ramp.