Skip to main content
Log in
XARP-10V — JST product photo
JST

JST XARP-10V XA Receptacle Housing, 10 Pos, 2.50mm

MPNXARP-10V
Active

JST XA series receptacle housing, 10 positions, 1 row, 0.098" (2.50mm) pitch, crimp termination, free-hanging, latch lock, natural PA66, contacts not included.

$0.3200Ref. price · indicative, final on quote
XARP-10V datasheet
StockIn Stock (21)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

XARP-10V Technical Specifications
ParameterValue
SeriesXA
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Lock
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.098\" (2.50mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions10

Product details

XA Series 10-Position Receptacle Housing

The 2.50mm pitch is a common wire-to-board spacing that balances routing density with adequate creepage for low-voltage signal and power circuits. At 10 positions, this housing matches a 10-circuit BOM line. The same XA series also offers 11-, 12-, and 13-position variants (XARP-11V, XARP-12V, XARP-13V) at the same pitch — useful if the circuit count changes without re-laying out the board footprint.

Termination is crimp-style, which allows field-serviceable wire replacement and consistent pull-off force when the correct tooling is used.

Frequently asked questions

Does the XARP-10V include contacts?

No, the XARP-10V is a housing only — contacts are not included. You must order the matching female socket crimp terminals separately.

What is the pitch of the XARP-10V?

The XARP-10V uses a 0.098" (2.50mm) pitch, which is standard for JST XA series interconnects.

Is the XARP-10V RoHS compliant?

Yes, the XARP-10V is RoHS3 compliant.