11-Position Receptacle Housing for the XA Series
The JST XARR-11V is the 11-circuit single-row receptacle housing in the XA series, built at a 0.098" (2.50 mm) pitch.
What the 11-Circuit Count and 2.50 mm Pitch Mean for the Fit
The 11 positions match a BOM line requiring 11 signal or low-power circuits in a single row. The single-row layout simplifies wire routing and crimping compared to a dual-row housing of the same circuit count.
Panel Mount and Latch Lock — Where This Housing Goes
The snap-in panel mount lets you install the housing into a rectangular cutout without hardware — it clips in from the rear side of the panel. The latch lock secures the mating header, so the pair stays together under vibration in an automotive door harness or a washing machine control board.
How the XARR-11V Sits Against the 10- and 13-Position Siblings
The XARR-11V shares the same 2.50 mm pitch, single-row layout, panel-mount snap-in, and latch lock as the XARR-10V (10 positions) and XARR-13V (13 positions). Pick the version whose position count matches your circuit count exactly; there is no current or voltage rating difference between them because the housing itself is unrated — the contacts carry the electrical spec.