The JST XHP-11 is the 11-circuit receptacle housing from the XH series, a 2.50mm-pitch wire-to-board connector family widely used in consumer electronics, appliances, and industrial control panels.
The 11-Position Catch
Eleven circuits is an uncommon count — the XH series also offers 10-position (XHP-10), 12-position (XHP-12), and 14-position (XHP-14) housings at the same 2.50mm pitch. If your harness calls for exactly 11 wires, this is the housing. If you have 10 or 12 circuits, the corresponding sibling shares the same pitch, material, and termination, so the same crimp terminal and header family apply — just match the position count to your circuit count.
Don't order half a connection. The XHP-11 is a housing only — you need the BXH-0015-PK crimp terminals (one per position) and the mating male header (e.g., B11B-XH-A) to complete the wire-to-board interconnect. The housing accepts 20-26 AWG wire with the proper crimp tool. The single-row, free-hanging design suits inline harnesses where a PCB-mounted header is on the other end.