Skip to main content
Log in
YLR-08V — JST product photo
JST

JST YLR-08V Receptacle, 8 Pos, 4.50 mm, YL Series

MPNYLR-08V
Active

JST YL series receptacle housing, YLR-08V, 8 positions, 2 rows, 0.177" (4.50 mm) pitch, white PA66, latch holder, crimp termination, free-hanging, contacts not included.

$0.5700Ref. price · indicative, final on quote
YLR-08V datasheet
StockIn Stock (24)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

YLR-08V Technical Specifications
ParameterValue
SeriesYL
GenderMale Pin
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Holder
Operating temperature-25°C ~ 90°C
ColorWhite
Insulation materialPolyamide (PA66), Nylon 6/6
NoteContacts Not Included
Pitch0.177\" (4.50mm)
PackageBulk
Rows2
Contact terminationCrimp
Positions8

Product details

Free-Hanging Receptacle for YL Series Power Harnesses

The JST YLR-08V is the 8-circuit, 2-row receptacle housing from the YL series, designed for in-line crimp termination to a cable harness. It carries a 0.177" (4.50 mm) pitch — wider than typical signal connectors, sized for power distribution or larger-gauge wire where creepage and wire-bundle clearance matter.

This is a housing-only part. Without the terminals, the housing cannot terminate a wire, so the BOM needs both line items.

Mating Half and Wiring

The YLR-08V mates with the corresponding YL series pin header (typically a through-hole or crimp-style header with male pins arranged in a 2-row, 8-position layout at 4.50 mm pitch). The free-hanging (in-line) mount means the receptacle sits in the cable harness, not on a PCB — the crimp terminals are inserted from the rear and the latch holds the wire in place.

Frequently asked questions

What contacts fit YLR-08V?

The YLR-08V is a housing-only part — contacts are not included. It accepts male pin crimp terminals from the JST YL series, designed for the 4.50 mm pitch cavity. The exact terminal part number depends on the wire gauge; confirm the correct contact for your build before ordering.

What is the mating connector for YLR-08V?

The YLR-08V mates with a YL series pin header — a 2-row, 8-position male header at 4.50 mm pitch. The latch holder on the receptacle engages the header's locking ramp for vibration-resistant retention.