The JST ZER-11V-S is an 11-circuit receptacle housing from the ZE series, designed as the wire-side half of a 1.50 mm pitch wire-to-board interconnect. The housing accepts female socket crimp terminals (ordered separately) and terminates to discrete wires via crimp contacts. It mounts free-hanging (in-line), mating with the corresponding ZE series pin header soldered to the PCB.
What mates with the ZER-11V-S?
This receptacle housing mates with the corresponding ZE series pin header (male) — the exact mating part number depends on the header's mounting configuration (through-hole or SMT) and circuit count. The 11-position housing pairs with an 11-circuit header at the same 1.50 mm pitch. The latch holder on the housing engages a matching ramp on the header, providing audible and tactile feedback when fully seated. No secondary locking mechanism is needed for most applications, though the latch alone should be verified against the expected vibration profile.
Contacts not included — what to order separately
The ZER-11V-S ships as an empty housing — no crimp terminals are included. You need to order the female socket contacts separately for the wire gauge in your harness.