Skip to main content
Log in
JST ZER-12V-S — Connector Housings

JST ZER-12V-S Receptacle Housing, 12 Pos, 1.50mm, Active

MPNZER-12V-S
Active

JST ZE series receptacle housing, ZER-12V-S, 12 positions, 1 row, 1.50mm pitch, female socket contacts, crimp termination, free-hanging, natural PBT, latch holder, bulk.

$0.2600Ref. price · indicative, final on quote
JST ZER-12V-S datasheet (PDF)
RoHSROHS3 Compliant
SeriesZE
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Sep 2026

Specifications

ZER-12V-S specifications
ParameterValue
SeriesZE
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeLatch Holder
Operating temperature-25°C ~ 85°C
ColorNatural
Insulation materialPolybutylene Terephthalate (PBT)
NoteContacts Not Included
Pitch0.059\" (1.50mm)
PackageBulk
Rows1
Contact terminationCrimp
Positions12

Product details

12-Position Free-Hanging Receptacle for ZE Series

The JST ZER-12V-S is a 12-position receptacle housing from the ZE series, designed as the wire-side half of a 1.50mm-pitch wire-to-board interconnect system.

Housing and Termination Details

The housing is a single-row, 12-way cavity block moulded in natural polybutylene terephthalate (PBT), rated for an operating range of -25°C to 85°C. Termination is crimp-style: you insert the pre-crimped female terminal into the rear cavity until the lance seats, then tug gently to confirm lock. No secondary retainer is used on this housing; the primary lance in the terminal provides the hold.

Mating and Contact Selection

This receptacle mates with the ZE-series pin header of the same 12-position count and 1.50mm pitch.

Frequently asked questions

Does ZER-12V-S include contacts?

No. The listing explicitly notes that contacts are not included. You must order the matching SZE-xxT crimp terminals separately.

What is the difference between ZER-12V-S and ZER-12P-S?

Both are 12-position ZE-series receptacle housings at 1.50mm pitch. The ZER-12V-S uses a latch holder fastening type; the ZER-12P-S uses a different locking mechanism. Verify the mating header's locking ramp style before selecting.