The JST ZHR-10 is a 10-circuit receptacle housing from the ZH series, designed for wire-to-board interconnects at a 1.50 mm pitch. It is a free-hanging (in-line) female socket housing that accepts crimp terminals — the contacts are ordered separately.
Key Specs That Drive the Fit
The 1.50 mm pitch is the tightest in the ZH family — it keeps the board footprint small but demands careful routing for adjacent traces. With 10 positions in a single row, the housing length is about 15 mm, which fits most low-profile enclosures. The crimp termination means you terminate the wires first, then insert them into the housing; the mating plug (the ZH series pin header) is ordered separately. The natural colour is standard for the series and has no functional impact on performance.
Contacts Not Included — What That Means for Your BOM
The ZHR-10 ships as an empty housing. You must order the matching female crimp terminals (JST SZH-002T-P0.5 or equivalent) separately. This is common for ZH-series receptacles — the housing and contacts are line items on the BOM. Factor the terminal part number and quantity into your procurement list; the housing alone will not complete a circuit.
Mating Half and Series Compatibility
The ZHR-10 mates with a JST ZH series pin header of the same 10-circuit count and 1.50 mm pitch.