The JST ZPDR-26V-S is a 26-circuit, dual-row receptacle housing from the ZPD series, on a 0.059" (1.50 mm) pitch. It is a wire-to-board interconnect: the housing accepts crimp-terminated female socket contacts and mates with a pin header soldered to the PCB. The natural PBT body carries a latch lock that clicks into place on the header for vibration-resistant retention.
Position Count and Pitch — The BOM Match
This 26-position housing on a 1.50 mm pitch fits between the 24-position ZPDR-24V-S and the 28-position ZPDR-28V-S. The dual-row layout keeps the connector body compact.
This is not an oversight — it is how the ZPD series is sold: the housing and the crimp terminals are separate line items. The buyer must source the matching female socket contacts (JST part number dependent on wire gauge and plating) to populate the housing. For a 26-position harness, that means 26 individual crimp terminals plus the pin header on the board side. Ordering only the housing leaves the assembly incomplete.
Operating Temperature and Material Limits
It does not extend to engine-bay heat or outdoor direct-sun exposure above 85°C. The ROHS3 compliance clears it for EU-market equipment without exemption paperwork.