The Amphenol 10067847-011RLF is a Secure Digital card connector and ejector, designed for board-edge card reader applications. It accepts standard SD cards with a push-push (push-in, push-out) insertion and removal mechanism — the card clicks into place and clicks back out with a second push, no separate eject lever needed. The connector carries 11 positions arranged as 9 signal contacts plus 2 dedicated switch contacts for card detection and write-protect sensing, following the standard SD Association pinout. Right-angle surface mount orientation places the card slot parallel to the PCB, typical for compact embedded systems, industrial controls, and consumer electronics with a flush card interface.
The 10067847-011RLF shares its 0.110" (2.80 mm) height, gold contact finish, and push-push mechanism with the 10067847-301RLF. The difference is the switch contact count: the -011RLF carries 11 positions (9 + 2), while the -001RLF carries 12 positions (9 + 3) and adds a board guide feature for alignment during assembly. For a BOM requiring the standard 11-position SD card pinout without the extra switch or alignment guide, the 10067847-011RLF is the direct fit.