Amphenol ICC (FCI) Minitek® Pwr 4.2 header, order code 10127820-0822LF, 8 positions, dual row, 4.20 mm pitch, 600 VAC/DC, tin-plated male pins, through-hole, shrouded - 4 wall, locking ramp, solder termination.
| Parameter | Value |
|---|---|
| Series | Minitek® Pwr 4.2 |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 600VAC/DC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -40°C~105°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.504\" (12.80mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tray |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.165\" (4.20mm) |
| Positions | 8 |
| Row spacing - mating | 0.165\" (4.20mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.138\" (3.50mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - mating | 80.0µin (2.03µm) |
The 10127820-0822LF is the 8-circuit member of Amphenol ICC (FCI)'s Minitek® Pwr 4.2 header line, a shrouded through-hole design with a locking ramp for positive retention in wire-to-board applications.
The 4-wall shroud and locking ramp prevent mis-mating and resist vibration-induced disconnect; the tin-on-tin contact interface suits moderate-cycle applications where gold plating is not required.
Yes — this header mates with Minitek® Pwr 4.2 receptacle housings that accept the matching crimp terminals. The 4.20 mm pitch and locking ramp are standard across the series.
The 6-position sibling 10127820-0622LF is the closest functional alternative if your BOM can accept fewer circuits — same pitch, same locking ramp, same tin plating.