The 0.118" (3.00mm) pitch and dual-row layout give a compact footprint that still leaves enough room between contacts for the 3.00mm row spacing, which simplifies PCB trace routing when the mating header is through-hole mounted.
Glow Wire Compliance and Material Choice
Glow wire compliant per the listed features — this means the PA66 housing passes the IEC 60695-2-11 glow-wire test at a specified temperature. For a compliance or quality reviewer, that is the single most important differentiator versus a standard Minitek Pwr 3.0 receptacle. The halogen-free polyamide also helps meet environmental directives for smoke and fume toxicity in enclosed equipment.
Crimp Termination and Panel Mount
Termination is crimp — the receptacle accepts the matching Minitek Pwr 3.0 female crimp terminal (sourced separately). The panel mount feature means the housing snaps into a rectangular cutout in a sheet-metal panel or bulkhead, locking with integral latches. The dual-row 12-position layout uses a 2 x 6 arrangement; the keying is built into the housing geometry to prevent mis-mating with a different-position-count header.
12 vs 16 Positions in the Same Series
The 10159684-12GLF shares the same 3.00mm pitch, dual-row layout, glow wire compliance, and black PA66 housing as the 16-position 10159684-16GLF. The only selection-relevant difference is the position count: 12 circuits vs 16 circuits. If the BOM calls for 12 power or signal lines, this is the correct member. If the design needs four more circuits at the same pitch, step up to the 16-position sibling — the panel cutout and header footprint scale with the position count.