Skip to main content
Log in
Amphenol 915-1005 — RF / Coaxial Connectors

Amphenol RF 915-1005 PSMP Plug, 2 GHz, 50 Ohm, RG-405

MPN915-1005
Active

Amphenol RF PSMP plug, female socket, 50 Ohm, 2 GHz, 480 V, snap-on, solder termination, for RG-405 semi-rigid coax, includes connector, contact, insulator.

$11.4700Ref. price · indicative, final on quote
Amphenol 915-1005 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

915-1005 key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Female Socket
Fastening typeSnap-On
Voltage rating480 V
Frequency - max2 GHz
Cable groupRG-405 (.085\", .086\", .087\" Semi Rigid, .085\" Conformable)
Operating temperature-65°C~165°C
Body materialBeryllium Copper
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk

All specifications

915-1005 additional specifications
ParameterValue
Includes3 pcs - 1 Connector, 1 Contact, 1 Insulator
Impedance50Ohm
Body finishWhite Bronze
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

PSMP Plug for RG-405 Semi-Rigid Coax — 2 GHz, 50 Ohm

The Amphenol RF 915-1005 is a PSMP-series plug with a female socket centre contact, designed for field assembly onto RG-405 (.085".086".087" semi-rigid.085" conformable) cable. Rated at 50 Ohm impedance with a 2 GHz maximum frequency, this plug handles signal paths up into the low microwave band. The snap-on fastening means it mates without tools, which is useful in blind-mate or dense-panel layouts where a wrench can't swing. The 480 V voltage rating is high for this class, so it can carry bias voltage or power-over-coax without breaking down.

This plug is built for RG-405 semi-rigid coax — the.085" and.086" outer diameter variants, plus the.087" size and.085" conformable types. The centre contact solders to the signal pin, and the shield terminates via solder as well. The beryllium copper body with white bronze finish gives good corrosion resistance and a consistent ground path.

Frequently asked questions

What cable type works with the Amphenol RF 915-1005?

The 915-1005 is designed for RG-405 semi-rigid coax, specifically the.085".086", and.087" outer diameter variants, as well as.085" conformable cable. It will not work with RG-316 or other flexible coax — the centre conductor and dielectric dimensions are different.

Is the 915-1005 a plug or a jack?

It is a plug with a female socket centre contact. The snap-on coupling mates with a PSMP jack (male pin).