Amphenol FCI BERGSTIK II 92634-168HLF, 68-position dual-row board-to-board header, 0.100" (2.54 mm) pitch, right-angle through-hole, gold-plated phosphor bronze contacts rated 5 A at 110 V, push-pull fastening, unshrouded, UL94 V-0 housing.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Gender | Male Pin |
| Mounting type | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.190\" (4.83mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Package | Bag |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 68 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact length - post | 0.318\" (8.08mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
Each phosphor bronze contact carries a 5 A current rating with gold or GXT™ plating on the mating surface at a 30.0 µin (0.76 µm) thickness. At 68 positions fully loaded, this header fills a dense signal interconnect for backplane or midplane applications where a large number of parallel data or control lines need a single connector interface.
The 0.318" (8.08 mm) post length on the solder side gives through-hole standoff for wave solder fillet formation on a typical 0.062" board.
The 92634-168HLF uses a 0.100" (2.54 mm) pitch on both the mating interface and the row spacing.
Each contact is rated 5 A, which is typical for a signal-level header at this pitch with gold-plated phosphor bronze contacts.
No, this is an unshrouded header with push-pull fastening — there is no latch or lock. Board retention relies on the through-hole solder joints and the mating connector's friction fit.