Skip to main content
Log in
EX0200010000G — Amphenol product photo
Amphenol

EX0200010000G Header, 2-Pos 5.00mm, Tin, Through Hole

MPNEX0200010000G
Active

EX series header, Male Pins, Partial Shroud, order code EX0200010000G, 2 positions, 1 level, 0.197" (5.00mm) pitch, tin mating finish, through hole, vertical orientation, solder termination.

$0.6700Ref. price · indicative, final on quote
EX0200010000G datasheet
StockIn Stock (24)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

EX0200010000G Technical Specifications
ParameterValue
TypeHeader, Male Pins, Partial Shroud
SeriesEX
Mounting typeThrough Hole
Voltage - UL300 V
Current - UL10 A
Operating temperature-40°C ~ 115°C
ColorBlack
Contact materialBrass
Housing materialThermoplastic
Insulation height0.374\" (9.50mm)
Material flammability ratingUL94 V-0
Pitch0.197\" (5.00mm)
PackageBulk
Number of levels1
Termination styleSolder
Header orientationVertical
Contact tail length0.132\" (3.35mm)
Positions2
Positions per level2
Contact mating finishTin

Product details

Pitch and position count

The EX0200010000G is the 2-position member of the EX series header line, carrying a single level of contacts at 0.197" (5.00mm) pitch. Tin-plated mating finish on brass contacts, through-hole vertical mounting with solder termination — rated 10 A per contact at 300 V, with an operating range of -40°C to 115°C.

Selection notes

The 5.00mm pitch and partial shroud suit board-level power distribution where 10 A per circuit is needed — the tin plating handles moderate mating cycles; for higher cycle life, a gold-plated sibling in the EX series would be the next step. Vertical through-hole orientation keeps the header standing off the board at 0.374" (9.50mm) insulation height — the contact tail length of 0.132" (3.35mm) sets the solder fillet depth.