Skip to main content
F32R-1A7H1-11006 — Amphenol product photo

F32R-1A7H1-11006 Amphenol ICC (FCI) FFC/FPC Connector

MPNF32R-1A7H1-11006
Active

Amphenol ICC (FCI) Aorora F32R series, F32R-1A7H1-11006 — 0.50 mm pitch, 6-position, right-angle SMT FFC/FPC connector, ZIF slide lock, gold-plated bottom contacts, 0.5 A, 50 V, UL94 V-0 LCP housing, -40°C to 105°C

$0.4800Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

F32R-1A7H1-11006 Technical Specifications
ParameterValue
SeriesAorora F32R
Mounting typeSurface Mount, Right Angle
Cable end typeStraight
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorGray
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.33mm
Positions6
Contact finish thickness1.97µin (0.050µm)

Product details

6-Position, 0.50 mm Pitch FFC/FPC — ZIF Slide Lock for Tight Spaces

Amphenol ICC (FCI) Aorora F32R F32R-1A7H1-11006 is a 6-position, 0.50 mm pitch FFC/FPC connector with a ZIF slide lock actuator. Right-angle SMT termination keeps the cable flat against the board — the 2.00 mm height above board suits low-profile enclosures. The bottom-contact design accepts 0.33 mm thick FFC/FPC cable, and the slide lock secures the cable without requiring a secondary latch. The 1.97 µinch gold plating on phosphor bronze contacts supports 30 mating cycles — enough for field-service reconnections in equipment that sees periodic cable swaps.

0.50 mm Pitch — Board Footprint and FPC Thickness

The 0.50 mm pitch drives the PCB landing pattern and the trace routing density. A thinner or thicker cable will not seat reliably in the ZIF mechanism.

30 Mating Cycles — Field-Reconnect Life

Rated for 30 mating cycles minimum, with gold-flash contacts (1.97 µinch). In a product that sees quarterly cable changes during maintenance, that translates to roughly 7.5 years of reconnect life at the contact interface. The gold layer prevents fretting corrosion on the FPC pads over the connector's service life.

Frequently asked questions

What is the pitch and FPC thickness for F32R-1A7H1-11006?

The pitch is 0.50 mm, and the connector accepts FFC/FPC with a thickness of 0.33 mm. Both are fixed — a different cable thickness will not seat in the ZIF mechanism.