Skip to main content
Log in
FM2-NARP-PCB-1 — Amphenol product photo
Amphenol

Amphenol RF AUTOMATE™ FM2-NARP-PCB-1, Fakra Plug, 50 Ohm

MPNFM2-NARP-PCB-1
Active

Amphenol RF AUTOMATE™ series, Fakra plug, male pin, FM2-NARP-PCB-1, 50 Ohm, 9 GHz, 335 V, 25 mating cycles, right-angle through-hole, Code A keying, gold-plated center contact.

$6.2300Ref. price · indicative, final on quote
FM2-NARP-PCB-1 datasheet
StockIn Stock (21)
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

FM2-NARP-PCB-1 Technical Specifications
ParameterValue
SeriesAUTOMATE™
Mounting typeThrough Hole, Right Angle
Connector typeMiniature Coaxial, Fakra, Twinaxial
Fastening typeLatch Lock
Voltage rating335 V
Frequency - max9 GHz
Operating temperature-40°C ~ 105°C
Body materialZinc Alloy
Housing colorBlack, Jet
Dielectric materialLiquid Crystal Polymer (LCP)
Center contact materialCopper Alloy
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesCode A
Impedance50 Ohms
Body finishTin
Mating cycles25
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

Right-Angle Fakra Plug for Board-Edge RF Launch

It carries a single male pin centre contact plated in gold over a copper alloy base, with a zinc alloy body finished in tin and a black LCP dielectric.

Code A Keying and Fakra Compatibility

This plug uses Code A keying, identified by the black housing colour. It mates with any Fakra-standard receptacle of the same code — the latch lock snaps into place and holds against vibration.

9 GHz Bandwidth and 50 Ohm Signal Path

The 9 GHz frequency ceiling covers the full 5G FR1 sub-6 GHz bands plus the 5.9 GHz DSRC band and GPS /L2/L5, with margin for harmonics. The 50 Ohm impedance matches the standard automotive coax cable impedance — no matching network needed at the connector interface. The 335 V voltage rating is well above any signal level in a vehicle; it is a dielectric withstand limit, not an operating target.

Frequently asked questions

Is the FM2-NARP-PCB-1 compatible with standard FAKRA connectors?

Yes, it is a Fakra-standard plug. It mates with any Fakra receptacle that uses the same Code A keying — the black housing and key profile ensure correct pairing and prevent cross-mating with other codes.

What is the mating connector for the FM2-NARP-PCB-1?

The mating half is a Fakra receptacle (jack) with Code A keying. The latch lock on this plug engages with the corresponding latch feature on the receptacle to hold the pair mated under vibration.

What keying code is used on the FM2-NARP-PCB-1?

It uses Code A keying, identified by the black housing colour. This is the standard code for many automotive antenna and telematics applications.