10-Position IDC Receptacle for 28 AWG Ribbon Cable
The Amphenol Quickie 86130103130345E1LF is a 10-position, dual-row IDC receptacle designed for mass-termination to 28 AWG ribbon cable. The 0.100" (2.54mm) pitch on both signal and row spacing is the standard grid for 0.050" center ribbon — the IDC tooling pierces the insulation and displaces the conductor in one press stroke. Gold plating on the female socket contacts gives this connector a corrosion-resistant mating interface suited for repeated connect-disconnect cycles in equipment that sees field service or periodic reconfiguration.
Polarizing Key and Strain Relief
The housing includes a polarizing key that prevents the receptacle from being inserted backwards into the matching header — a common assembly error on unkeyed IDC connectors. The integrated strain relief clamps the ribbon cable jacket behind the IDC termination point, so cable pull loads the jacket rather than the individual conductor-to-contact interface. These two features together make the 86130103130345E1LF a field-replaceable choice for harnesses that get plugged and unplugged during maintenance.