1.20mm Pitch — Two Circuits, Single Row
At 1.20mm pitch, this is a fine-pitch housing for its class — the contact spacing is tight enough to keep the harness narrow but still accepts individual crimp terminals. Two positions in a single row means you're wiring a two-wire circuit, typically for power or signal in a sensor, switch, or small LED module.
Crimp Termination — Contacts Not Included
This is a crimp-and-poke housing: you insert pre-crimped terminals into the rear of the receptacle until they lock. The contacts are female sockets — you'll need the matching ACH series crimp terminal (sold separately) sized for your wire gauge. The housing itself has no solder tails or PCB footprint; it terminates in-line, so the wire exits straight out the back. The natural PBT body provides the dielectric and mechanical retention, but the terminal's locking lance does the work of keeping the contact seated.