The JST NSHR-14V-S is the 14-position receptacle housing from the NSH series, a 1.00 mm pitch wire-to-board connector family built for compact internal harnesses. The natural PBT insulation handles -25°C to 85°C, which covers consumer electronics, appliance control boards, automotive cabin modules, and industrial sensor interfaces where the connector sits inside an enclosure.
The 14 positions at 1.00 mm pitch give you a 13.00 mm housing body width — narrow enough for a dense PCB edge or a tight harness breakout. The single-row layout keeps the crimp tooling simple and the wire dressing predictable. The 1.00 mm pitch is the same across the entire NSH series, so the mating header footprint stays consistent whether you spec 11, 12, 14, or 15 circuits. The crimp terminals are not included in this housing — order the matching female socket contacts separately, typically for 28-32 AWG wire depending on the terminal variant.