JST PHD series receptacle housing, PHDR-16VS, 16 positions, 2 rows, 0.079" (2.00mm) pitch, natural PA66, free hanging in-line, crimp termination, contacts not included.
| Parameter | Value |
|---|---|
| Series | PHD |
| Gender | Female Socket |
| Mounting type | Free Hanging (In-Line) |
| Connector type | Receptacle |
| Operating temperature | -25°C ~ 85°C |
| Color | Natural |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Note | Contacts Not Included |
| Pitch | 0.079\" (2.00mm) |
| Package | Bulk |
| Row spacing | 0.079\" (2.00mm) |
| Rows | 2 |
| Contact termination | Crimp |
| Positions | 16 |
The JST PHDR-16VS is a 16-position, 2-row receptacle housing from the PHD series, built for a 2.00 mm pitch wire-to-board interconnect. It is a free-hanging (in-line) housing that accepts female socket crimp terminals — the contacts are ordered separately.
This housing does not include contacts — the note is explicit. You order the female socket crimp terminals separately for your wire harness.
No — the housing is shipped without contacts. The note "Contacts Not Included" means you must order the female socket crimp terminals separately (JST SPHD-002T-P0.5 or equivalent) for your wire harness.
The pitch is 0.079" (2.00 mm), with the same 0.079" row spacing between the two rows.
It mates with the JST PHD series pin header — a 2.00 mm pitch, dual-row header in the corresponding 16-position count. The header can be through-hole or SMT depending on the board design.